. OPEN VPX

Behlman VPXtra1500CS 6U Open VPX VITA 62 High Power AC-DC Power Supply

 

Behlman VPXtra™1500CS COTS AC to DC power supply is a rugged, highly reliable, conduction cooled, switch mode unit built for high-end industrial and military applications..

1500 Watts VPX power supply

6U Open VPX VITA 62 High Power, Three-Phase AC-DC Front-End Module

Behlman VPXtra™1500CS COTS AC to DC front-end module is a rugged, highly reliable, conduction cooled, switch mode unit built for high-end industrial and military applications. The VPXtra™1500CS is a VITA 62, Open VPX compliant, 6U, front-end module that accepts a 115/200 VAC, 3-phase input, IAW MIL-STD-704, and delivers up to 1500 Watts of 33 VDC power dependent on cooling capability.

The VPXtra™1500CS front-end module has no minimum load requirement and has short circuit protection as well as over current and thermal protection. The front-end module is designed to support the rigors of mission critical airborne, shipboard, vehicle and mobile applications.

Designed and manufactured with Xtra-CoolingTechnologies, Xtra-Reliable™ Design and Xtra-Rugged™ Construction, makes the Behlman VPXtra1000CD your best choice.

  

  • VPXtra™ is a trademark of Behlman Electronics.
  • VPX is a trademark of VITA.

  Features

  • Open VPX VITA 62 compliant

  • Wide input range

  • High power DC output

  • Environmental IAW VITA 47

  • Conduction cooled at card edge

Adobe acrobat

Click here for Printable Specifications Sheet.

Click here for Printable Data Sheet

SPECIFICATIONS

INPUT

Voltage:

115/200 VAC +/- 20%, 3 phase, 47-440HZ

 

OUTPUT

Voltage:

33 VDC @ 46 Amps
Auxiliary: 3.3 VDC @ 0.2 Amps
Power:
1500 Watts
Line regulation:
0.5% maximum
Load regulation:
5.0% maximum (0-100%)
PARD-Ripple & Noise:
300mv P-P (0-20 Mhz)
Efficiency:
90% typical

 

PROTECTION CIRCUITS

Over voltage/Over current:
120% typical
Over temp warning:
80 Degrees C +/-5 degrees C
Over temp:
90 degrees C typical @ full load

 

CONTROLS (+12 VDC IAW VITA 62)

Inhibit:
Output OFF - active low

Enable:

Input ON - active low
Fail: Output voltage out of tolerance –active low

 

INDICATORS (Four LED's )

AC OK:
Green
Output Enable:
Green
DC OK: Green
Over Temp:

Red

 

GENERAL CHARACTERISTICS (Isolation)

Input to Output:
1250 VDC
Input to Case: 1250 VDC
Output to Case:

500 VDC

 

ENVIRONMENTAL (Temperatuer at card edge)

Temperature: (IAW VITA 47)
Operating:
-40 C to +71 C
Storage:

-40 C to +105 C

 

MECHANICAL (1.0 inch pitch)

Dimensions:
9.19"L x 6.64"W x 0.97"H
Weight:
5.5 lbs
Input Connector: P0 - IAW O&C drawing 24150
Output Connector:

P1 - IAW O&C drawing 24150

 

Designed to meet the following MIL Standards

Shock:
MIL-STD-810
Vibration:
MIL-STD-810
Humidity: MIL-STD-810
EMI: MIL-STD-461 (CE102 Requires external filter, RE102 When installed in appropriate shielded chassis)

West Coast

2363 Teller Road / Suite 108,
Newbury Park, CA 91320
TEL (800) 456-2006 - (805) 375-7046
FAX (805) 498-2147

Headquarters:

80 Cabot Court.,
Hauppauge, NY 11788
TEL (800) 874-6727 - (631) 435-0410
FAX (631) 951-4341 * E-mail: sales@behlman.com

Easy Payment, We accept:
MasterCard, Visa,
American Express

About Behlman | Select a Product | Catalog Request | Support | GSA
Home | COTS | VPX | VME | Application Notes | Sales/Reps | Orbit Int'l

| Orbit Int'l